Up for sale is a gbody frame that I pulled off my '86 Regal limited that was equipped with a 36v lay n play setup so never any standing wheels or hopping. Rear arches were reinforced by designs unlimited an the front is cut for cylinders. Pics should answer most questions. $300 for frame.
I also have a pair of bare metal lower a-arms that are reinforced and molded with bushings installed for $200 as well as a pre-cut and pre-bent front belly plate for $65. Half sheet of metal (2' x 8') of 3/16" metal for 150. Take it all as a package deal. No issues with the frame, I just used a different one so I could minimize my cars down time. Located in 60163 right off the west side of Chicago. Pickup only.
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Pair of lower gbody a arms for sale. Reinforced n molded, currently in bare metal with bushings installed.
![]()
I also have a pair of bare metal lower a-arms that are reinforced and molded with bushings installed for $200 as well as a pre-cut and pre-bent front belly plate for $65. Half sheet of metal (2' x 8') of 3/16" metal for 150. Take it all as a package deal. No issues with the frame, I just used a different one so I could minimize my cars down time. Located in 60163 right off the west side of Chicago. Pickup only.
Pair of lower gbody a arms for sale. Reinforced n molded, currently in bare metal with bushings installed.
